Автор Тема: Российско-итальянская обсерватория "FIRST"  (Прочитано 168444 раз)

Надежда

  • Участник проекта
  • Пользователь
  • *
  • Сообщений: 36
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #30 : Июнь 27, 2009, 17:17:37 »
Collepardo со стороны Аббатства Трисулти. Обсерватория FIRST - белое здание с коричневой крышей внизу кадра.

Надежда

  • Участник проекта
  • Пользователь
  • *
  • Сообщений: 36
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #31 : Июнь 27, 2009, 17:18:46 »
Более подробный кадр с обсерваторией. ;D

Надежда

  • Участник проекта
  • Пользователь
  • *
  • Сообщений: 36
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #32 : Июнь 27, 2009, 17:24:39 »
Фабрицио-мл., Каролин и В.Куприянов на балконе гостиницы - маленький перекур. :D

Надежда

  • Участник проекта
  • Пользователь
  • *
  • Сообщений: 36
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #33 : Июнь 27, 2009, 17:28:53 »
Вечерний Collepardo

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #34 : Июль 01, 2009, 12:22:28 »
Игорь, привет!

Договор с итальянцами Аким подписал

Володя

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #35 : Июль 24, 2009, 14:03:34 »
Hi Fabrizio,

> We started GEO survey campaign with first since 8 days.
> Every night the survey fails, at different points of the list.
> the mount blocks, giving as error "no hc response".
> If we are there we restart everything , park telescope and start newly from
> the point where the survey fails , unfortunately this happened only two
> times so we have only two entire nights of observation.
>
> Any idea on how to solve this big problem?

This looks like a USB connection problem. Probably I was wrong when I
told you that any COM to USB converter will fit. You may try to
temporarily replace the one you are using now with that utilizing the
FTDI chip (which is the best of all I know) - I remember that you've
got at least one of this kind. If this helps, just try to buy the same
adaptor. The second possible reason could be the mere physical
connection problem - just check all cables and connectors. I can
imagine no other reasons for HC connection to fail.

Sorry for a delayed response - now I'm at 6-meter telescope (Caucasian
mountains), and rarely checking my e-mail account. And in the next ~10
days I will be completely inaccessible by e-mail at all - will have a
short vacation in Crimea :)

Bye,
Vladimir

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #36 : Июль 24, 2009, 17:03:51 »
Hi Fabrizio,

The USB connection problem may be caused by poor connection between USB cables. It is necessary to disconnect and again to connect all USB cables. And then it would be fine to fix the connectors of USB cables, i.e. by adhesive tape.

BTW, have you already connected telescope control PC to Internet?

Regards,
Igor

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #37 : Октябрь 06, 2009, 21:29:43 »
Dear Igor, Dear Leonid

this is to inform you we received the Agreement.
Thank you very much.

Best Regards

Maria

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #38 : Октябрь 20, 2009, 17:55:16 »
Dear Leonid,

we arranged everything for the internet connection in Collepardo, but we need to wait the operator for the installation of the
internet line of the university. We are pressing our administration and the internet operator for this aim.

Best Regards
Maria

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #39 : Октябрь 30, 2009, 00:47:56 »
Dear Leonid,

I talked yesterday with the operator for our internet connection in Collepardo.

They confirmed us that in 2 weeks (I think 20 days)  they will come to activate this line for our Department.
I will inform you when they will come, so you can start to use FIRST.

Best Regards

Maria Libera

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #40 : Октябрь 30, 2009, 22:39:46 »
Леня, привет!

> Если у тебя найдется пара свободных минут, не мог бы мне отписать
> положение дел в Коллепардо? Что там со скопом, как монтировка, что у нее
> с часовым ведением? Как я понял там не стоит ХАОС, чем там управляют?
> Когда подключат инет, я хочу в попробовать половить яркие объекты вдали
> от эклиптики, там где не ступает нога обзоров. Ну и конечно обзоры по
> мусору.
>
> Вообщем к чему готовиться то?

Там стоит полный комплект - CameraControl, CHAOS, Apex. Староватых уже
версий, поэтому придется их, видимо, обновить. В частности, перейти на
модуль управления EQMOD вместо SynScan в ХАОСе.

Инструкция по обновлению на данный момент. 1) CameraControl
устанавливается поверх, все по умолчанию. 2) Апекс, если понадобится
обрабатывать тоже дистанционно, - тоже поверх, по умолчанию, все пакеты,
какие есть. 3) ХАОС: удалить из директории Pulkovo\CHAOS (куда он
установлен) файл SynScan.dll, запустить инсталлятор, выбрать модуль
EQMOD. После установки зайти в Settings - Control system settings,
выставить COM-порт, сделать один раз алайнмент. Он делается прямо из
окна настройки, из соотв. закладки - вводишь альфу и дельту какой-нибудь
звезды, нажимаешь Point, снимаешь кадр, подводишь кнопками
влево-вправо-вверх-вниз трубу, а когда выставил звезду в центр,
нажимаешь Confirm. В первый раз лучше это делать в присутствии
кого-нибудь там с английским (Фабрицио, Мариэлла или кто-нибудь из их
аспирантов - Уго по-английски не говорит), с голосовой связью - чтобы
труба не поехала не туда, если исходные нуль-пункты очень далеко от
реальных. Потом выбрать парковочное положение (в частности, умолчальное:
часовой 6h, склонение +90), выставить туда трубу командой наведения по
t,delta, зайти на вкладку Parking настроек системы управления и нажать
кнопку Set park position. Потом можно парковаться из меню Operation -
Park. При управлении в режиме PC Direct (протокол EQMOD) необязательно
вводить дату-время после включения и парковаться в конце. Если не
трогать трубу иначе, как из ХАОСа, он запоминает последнее положение,
так что после включения алайнмент делать не надо.

Я, правда, пока туманно представляю себе, как это все точно будет
организовано на предмет выяснить погоду, попросить открыть павильон и
трубу, включить питание и выбрать режим PC Direct в меню SynScan (это
то, что мы не можем сделать дистанционно при всем желании). Но ты уж
что-нибудь придумай

Сами они, как я понимаю, это время не наблюдали. А если наблюдали что-то
для себя, то я все показал - я имею в виду управление из ХАОСа.
Монтировка - нормально. Часовое тоже.

> Еще вопрос, какое фокусное у 25см телескопа?

Расчетное 625, фактическое 628мм.

Удачи!
В.К.

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #41 : Ноябрь 10, 2009, 00:29:27 »
После нескольких консультаций с Володей Куприяновым из Италии прислали измерения за 17 сентября - смогли наконец сами обработать.

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #42 : Ноябрь 14, 2009, 02:07:49 »
Hi Fabrizio and Mariella,

I'm sending a copy to Leonid Elenin who, I hope, will start remote
operation of FIRST in the meantime and thus should be aware of our
progress, and to Igor and Vladimir as well for the same reason :)

Sorry for late reply - back from Bolivia, I spent the last week some 150
kilometers away from Kiev (together with Igor, Vladimir, and Leonid, by
the way) and had no chance to even check my e-mail.


> for some images we obtained this
>
> I THINK WE WON but not sure
>
> Now we will try on others but before we would like to receive your opinion

First, my congratulations! Definitely, you won. Still a few remarks. I
assume that you visually checked frames after processing and removed any
possible false detections from .RES file, if any. Most of them are
"objects" with only 3 measurements of 5 (however, of course, not all
such objects are false!). And that you had a TLE matching the date of
observations in .Apex\tle, so any question marks in ident.txt refer to
objects that are actually missing from TLE.

Another comment refers to objects like 23331 in .RES.check. If you get
the situation like this, when one or two measurements in a series match
some catalog object (23331 in this case), while others match another
object or no object at all, this is probably a hint that these one or
two measurements should be considered as outliers in this series.
Unfortunately, you cannot confirm this with absolute confidence, as Apex
then splits the whole series into two or more separate sub-series,
according to presumable identification of each measurement, so you
cannot identify outliers according to their residuals. Moreover, this
may be also a matching error, especially if you use outdated TLEs. You
cannot tell one from another. But, in any case, it is safer to consider
such measurements as outliers and remove them from .RES if you have
enough measurements left (three or more).

Another bad case is 23686. Here you obviously have a mixture of two real
objects within the same block of measurements, under the same name
23686. This can be easily inferred from external residuals: RA residuals
for the first 5 measurements clearly differ from those for the next 5.
Also initial orbit determination gives an absolutely crazy result, with
RA residuals of the order of 10 arcminutes! The reason here is false
match, probably due to bad TLEs. Two distinct objects from different
series were identified as a single catalog object, so their measurements
fell into the same block. The same is the case also for 34710. In these
two cases you had to manually split each series into two separate blocks
of measurements, leaving the initial name (e.g. 23686) for the first of
them and assigning a new arbitrary name (e.g. 2368601) to the second
one. Generally, you should pay special attention to "objects" containing
more measurements than the length of original series of observations for
each field (like 10 instead of 5 in our case). Depending on overlap of
adjacent fields, there is non-zero probability that these could be
actually the same "physical" object appearing in both fields (usually at
their edges, or a fast-moving object), but in most cases this is a mere
mis-identification. A good news is that the next update of Apex will not
use catalog names at all in .RES file, assigning unique internal names
to each object found (still ident.txt will be available for your
curiosity :) ), so by definition there is a guarantee that no distinct
objects will appear in the same block of measurements. Keep an eye on
updates in /unstable. But in the version you use Apex tries to do more
than it can, so you need to check this manually.


Apart from these minor comments, you reached full success, I think.
Congratulations again!

Regards,
Vladimir

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #43 : Ноябрь 27, 2009, 19:10:48 »
Internet for FIRST in Collepardo

Dear All,

finally I am pleased to inform you TELECOM operator today provided us the connection for observatory.
We are planning to go to the observatory after 8th of December.

Vladimir K, please, start thinking about the software we could use for remote control and write us the "instructions for installation and use" by e-mail (we have static IP address).

Thank you very much
Best Regards
Mariella

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 57038
Re: Российско-итальянская обсерватория "FIRST"
« Ответ #44 : Ноябрь 28, 2009, 15:19:15 »
> Dear All,
> finally I am pleased to inform you TELECOM operator today provided us the
> connection for observatory.

Yeeeesssssss!!!


> We are planning to go to the observatory after 8th of December.
> Vladimir K, please, start thinking about the software we could use for
> remote control and write us the "instructions for installation and use" by
> e-mail
> (we have static IP address).

Dear Mariella, on Dec 8 I'll just return from South Vietnam and
Kamboja to Hanoi and will be sporadically available via e-mail, so
I'll try to participate as much as I can. However, Leonid Elenin is a
person who's fully responsible for remote operation of FIRST, so I
address your question to him. I think, however, that it will be a sort
of remote desktop connection (which is built into Windows) or
TeamViewer (freeware) or a similar software - whatever he finds more
appropriate. Incidentally, in the case of TeamViewer you are even not
required to have a static IP. In any case, I expect Leonid to provide
the full details of preparation procedure - I mean, what do you need
to install and how to configure it. So currently I cannot do more than
wishing you good luck! :)

Regards,
Vladimir