Автор Тема: И еще про купола  (Прочитано 30211 раз)

DD

  • Проект-техника
  • Старожил
  • ****
  • Сообщений: 1314
Re: И еще про купола
« Ответ #15 : Август 16, 2013, 17:48:29 »
Интересует не про такой челюстной купол, а про классический, поворотный, с забралом. Такой, как на санглокском Ц-600.
Когда у общества нет цветовой дифференциации штанов, то нет цели!

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #16 : Август 16, 2013, 17:49:20 »
Санглокский быстро вращаться не сможет в принципе.

Diskus

  • Участник проекта
  • Старожил
  • *
  • Сообщений: 589
Re: И еще про купола
« Ответ #17 : Август 17, 2013, 16:00:05 »
Коллеги, вот такой ламерский вопрос про купола. В нормально спроектированных системах скорости поворота купола по азимуту, и скорость перенаведения монтировки, стоящей внутри купола - одинаковая? Или же сделать купол столь же шустрым, как монтировка нельзя?
Нормальный купол так и работает .
При необходимости скорость поворота по азимуту можно приблизить к 30-40 град в сек.

DD

  • Проект-техника
  • Старожил
  • ****
  • Сообщений: 1314
Re: И еще про купола
« Ответ #18 : Август 17, 2013, 16:15:10 »
Да, этого бы более чем хватило.

Еще один вопрос. У нас кто-нибудь вообще занимался вопросом увязки стандартного софта В.К. (Хаос) с управлением куполами? То есть - в Хаос закладываем программу обхода площадок в виде файла object.list; по этой программе Хаос крутит монтировку. Но ведь купол-то тоже надо синхронно крутить. Не будет же наблюдатель всю ночь сидеть рядом с пультом...
Когда у общества нет цветовой дифференциации штанов, то нет цели!

krypton

  • Гость
Re: И еще про купола
« Ответ #19 : Август 17, 2013, 16:48:44 »
Дык, а чего испытывали в прошлом году на ЭОП-2? В том числе, синхронизацию азимутального вращения купола с поворотом монтировки, управляемой CHAOS.

krypton

  • Гость
Re: И еще про купола
« Ответ #20 : Август 17, 2013, 16:59:44 »
Да, и в Косала, на TI-шном куполе, Володя реализовал аналогичную систему синхронизации с наведением: http://astronomer.ru/forum/index.php?topic=1590.msg45526#msg45526

DD

  • Проект-техника
  • Старожил
  • ****
  • Сообщений: 1314
Re: И еще про купола
« Ответ #21 : Август 17, 2013, 17:02:36 »
Нормально.
Когда у общества нет цветовой дифференциации штанов, то нет цели!

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #22 : Январь 14, 2014, 02:03:36 »

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #23 : Январь 14, 2014, 02:08:45 »
http://www.omegon.eu/instruments/omegon-observatory-dome-3m-diameter/p,19959

Omegon Observatory dome, 3m diameter
Product no.: 19959
Manufacturer: Omegon

€ 4,165.00

This observatory dome is made from 6mm thick glass polyester laminate, which guarantees complete protection against all environmental conditions and simultaneously provides a high level of stability, with longevity guaranteed. Special reinforcement on the inside of the construction provides an additional increase in stability. The water-tightness of the dome is guaranteed by the special design of the joints, which prevent ingress of water to the inside the dome. A large air gap in the base and the light colour of the dome prevent excessive heating up.

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #24 : Январь 14, 2014, 02:22:15 »
http://durangoskies.com/index.php?route=product/product&path=59&product_id=54

Dome Diameter 10' (3.049 meters)  $7,250.00
Ships 120-140 days after order

Technical Innovations manufacturers the Home-Dome and Pro-Dome fiberglass observatories. These observatories are available in stand-alone (Pro-Dome) and on-structure (Home-Dome) versions. The standard colors are white outside and dark blue inside. Special colors are available and Technical Innovations can do a color match from a sample you provide or you may request a color chart. Fire retardant can be added for additional protection in fire danger areas.

The Home-Dome HD10 model is a complete ten foot diameter fiberglass observatory for on-structure use. It includes four dome quadrants, rear cover, shutters, dome support ring, 12" high base ring, stainless steel assembly hardware, caulk, and instructions. The optional Rectangular Skirt (RS10) is a eight piece fiberglass skirt to make transition between the circular observatory and a flat/sloping roof or building edge. The horizontal flange of the RS10 fastens under a wall or base ring flange, while a vertical flange attaches to your structure. The optional Circular Skirt (CS10) is the same as RS10, except the four piece skirt ends in a 10' 8" diameter circle with drip flange.

Electric motors for shutter operation and rotation are available for all domes. All motors are 12 VDC and can be added at any time to the dome. For robotic operation, Technical Innovations provides Digital Dome Works (DDW), a computer based automation system which allows you to open and close the shutter, and control the dome azimuth so that it matches the telescope position. While the basic DDW is designed primarily for situations where the control room and the observatory are located no more than 400 feet apart, Technical Innovations offers options that allows you to operate an observatory many miles away or across the Internet.
« Последнее редактирование: Январь 14, 2014, 02:46:41 от Игорь »

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #25 : Январь 14, 2014, 02:23:30 »
« Последнее редактирование: Январь 14, 2014, 02:45:03 от Игорь »

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #26 : Январь 14, 2014, 02:54:41 »
http://www.apm-siriuskuppeln.de/en/details/2/95903/school-model-35m-without-walls

Observatory Dome School Model, 3.5m, without walls
  
SIRIUS OBSERVATORIES offers also domes without walls.

The marine-grade fibreglass construction

The dome is fastened completely simply by means of an attachment ring on the already existing wall. The School model with a diameter of 3.5m sufficient place for instruments with an opening of up to 600mm.

This dome size is suitable for Dobson telescopes, SC telescopes (like the LX200GPS 16") or a RC-telescope with 500mm opening on an equatorial Mount. The School Model is for associations and schools, up to 9 persons.

The School-Model is not motorised, motorisation for dome rotation and/or shutters is optional available.

Facts
  
 Dome only height: 1.75m
Dome diameter: 3.5m
Aperture width: 1.0m
Aperture length (to Zenit): 400mm
Wind speed: 144km/h  

Developed and built in Australia, our observatories withstand some of the coldest regions on the planet (including northern Finland), to some of the warmest (including Australia, the Utah desert, Arizona etc).

Sirius’ customers, whose numbers exceed five-hundred, have included:
NASA, Muhlenberg College USA - White Sands Missile Range, USA - Sydney University - Queensland Department of Education - German Navy - Malaysian Prime Minister - Hamilton Island Resort - Mountain Skies Astronomical Society, USA - Observatory Park, Taipei - Galway University, Ireland - Brisbane Boys Grammar School - Xavier College, Melbourne - Trinity College, Perth - Christian Brothers College, Adelaide … the Caltex America School, Indonesia – Graz University, Austria – Diffraction Limited, Canada – University of Western Australia.

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #27 : Январь 14, 2014, 03:09:16 »
http://www.observa-dome.com/index.html

Our Observa-DOMES are manufactured using advanced computer controlled cutting and fabrication equipment. We are able to offer any custom size Observa-DOME from 2.5 through 18 meters in diameter. 

Several popular sizes are listed below with links to detailed CAD drawings. These drawings are in "PDF" format and may be opened or viewed using Adobe Acrobat reader. 

We are adding drawing files daily, so please check back if you can not find the drawing you're looking for.  Our newest sizes are the 3.5 and 5.5 Meter Observa-DOMES.

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951

Игорь

  • Администратор
  • Старожил
  • *
  • Сообщений: 56951
Re: И еще про купола
« Ответ #29 : Январь 14, 2014, 03:21:11 »